Fascias & Soffits AcrossTayside & Fife —Clean Lines. Zero Rot.
uPVC fascias, soffits, bargeboards and cladding installed in a day per elevation. Stops timber rot, lifts kerb appeal, sealed against bird and pest entry — supplied with the manufacturer's warranty on the uPVC system itself.
Manufacturer warranty · Same-day per elevation · Fully insured
Fascias & Soffits — what it covers and when it's right.
Fascias are the boards at the eaves where the gutter attaches. Soffits are the boards underneath. Bargeboards are the angled boards at the gable ends. Together they finish the roof, support the gutter and protect the structural timbers from weather and pests.
Anyone with peeling paint on timber fascias, sagging gutters, woodpecker damage, visible rot, bird entry into the loft, or simply tired-looking eaves. Universal job — every house has them and most need attention every 25–40 years.
When painted timber starts to fail (typically 7–15 year repaint cycle becomes uneconomic), when rot is visible, when gutters have been sagging despite re-bracketing, or as a planned upgrade during a re-roof.
Working at eaves height — typically 5–7m on a two-storey house. The job needs tower scaffold or a roof ladder, not a leant ladder. It also needs careful flashing reinstatement and proper ventilation maintenance — both routinely missed by handyman installs.
The cost of ignoring it always exceeds the cost of fixing it.
Roof timber rot
Failed fascias let water track into the rafter feet. Replacement of rotted rafter ends is a structural job costing 10–20× a fascia replacement.
Bird and pest entry
Holes in failing soffits become bird and squirrel access into the loft — noise, mess, damaged insulation, electrical chewing.
Sagging gutters
Gutter brackets are only as strong as the fascia they're screwed into. Rotted fascia = falling gutter.
Constant repainting bill
Timber fascia maintenance is in writing on request every 7–10 years. uPVC eliminates the cost permanently.
Lost kerb appeal
Peeling, mossy fascias are the single most visible sign of a neglected property — instant value impact at sale.
Common mistakes we get called to fix
Most of these started as someone trying to save a few hundred pounds.
- Capping over (cladding) rotten timber instead of replacing it — rot continues underneath
- Blocking eaves ventilation during install — guaranteed loft condensation within a year
- Cheap thin-gauge uPVC that warps and discolours within 5 years
- No replacement of the felt/underlay drip at the eaves while the fascia is off (massive missed opportunity)
- Working from a leant ladder — unsafe, uninsured, and won't be paid out by your home insurer if something happens
A five-step system — no surprises.
Step 1 — Free survey
Inspect existing fascia, soffit, bargeboard condition. Honest advice on capping vs. full replacement.
Step 2 — Written quote
Itemised by elevation and component. Written quote including all access, removal and disposal.
Step 3 — Access set up
Tower scaffold per elevation. Gutters carefully removed and labelled for refit (or new gutter quoted alongside).
Step 4 — Strip & install
Old timber stripped, rafter feet inspected and treated/replaced where needed, new ventilated soffit and capped or replaced fascia fitted, bargeboards on gables.
Step 5 — Gutter refit & finish
Gutters refitted (or new system installed), eaves ventilation confirmed.
What you actually get when you hire Rossi.
Maintenance-free
uPVC needs nothing more than an occasional wash. No more repaint cycles, no more rot.
Manufacturer warranty
Colour-fast, weather-fast uPVC from Floplast, Eurocell or Swish — supplied with the manufacturer's written warranty in your name.
Protects the roof structure
Sound fascias and soffits keep water away from rafter feet. The single best long-term protection for the roof you've already paid for.
Bird and pest sealed
Continuous soffit and over-fascia ventilation grilles keep airflow without letting wildlife in.
Visible kerb-appeal lift
Crisp white or anthracite fascias instantly modernise a property — a on requestk house looks on requestk.
Quick — typically 1–3 days
Per-elevation install, minimal disruption, no scaffold for weeks.
The materials, methods and variations behind fascias & soffits.
Fascia and soffit jobs split into two: capping (cladding over existing timber) or full replacement (strip timber, install all-new). The right choice depends on the condition of what's there. Done properly, neither needs touching again for two decades.
Materials we use
- Floplast, Eurocell and Swish uPVC fascia boards — 18mm and 25mm, square or ogee profile
- Vented and unvented soffit boards — 10mm hollow or solid, smooth or woodgrain finish
- Colour options: white, black, anthracite grey, rosewood, light oak, golden oak
- uPVC bargeboards with matched corner trims
- uPVC cladding (shiplay, vertical) for gable apex and dormer cheeks
- Stainless steel and polymer-coated fixings — never bright steel, which streaks rust down white uPVC within 18 months
Methods we follow
- Strip-and-replace where existing timber is rotten or beyond economic recovery — the right answer in 80% of cases
- Capping over sound timber where rot is absent and the timber is structurally OK — saves cost where appropriate
- Continuous over-fascia ventilation strip to maintain BS 5250 airflow requirements
- Vented soffits at standard 10mm air-gap equivalent
- Felt support tray installed at eaves where existing underlay terminates too short
- Lead soakers and drip edges renewed where they meet the new fascia
Variations of this service
Full strip and replace
All timber removed, structural rafter feet treated or replaced, new uPVC installed throughout. The longest-lasting option.
Capping over existing
uPVC cladding fixed over sound timber. Faster and cheaper where rot is absent, but only valid if the underlying timber is genuinely sound.
Bargeboards only
Gable-end work where the eaves are already done. Often combined with gable cladding for matched finish.
Dormer cladding
uPVC shiplap or vertical cladding to dormer cheeks — eliminates the painted timber that fails fastest.
Combined with re-roof
Cheapest possible time to do fascias is during a re-roof — scaffold is already up and gutters are already off.
When it applies
Typical situations we're called for across Tayside and Fife.
- Routine 25–40 year replacement cycle
- Storm damage repair
- Pre-sale presentation work
- Combined with re-roof
- Bird/pest entry remediation
Residential vs commercial
Domestic uPVC fascias are typically completed in 1–3 days. Commercial fascias on retail, office and industrial buildings are similar in scope but include CDM 2015 and edge-protection requirements at scale, factored into the quote.
Answers, in plain English.
Something not covered? Phone 01738 260550 — answered by a roofer.
Every job is different — call us on 01738 260550 or send a quick message and we'll give you a written, no-obligation quote.
Often booked alongside fascias & soffits.
- Guttering
Repaired or fully replaced — no more overflows or damp walls.
- Roof Repairs
Fast, made-good repairs that stop leaks and protect your home.
- Roof Replacement
Full re-roofs built to last decades, written quote and guaranteed.
Fascias & Soffits across Tayside & Fife.
Same service, same standards, same care in every town we cover.
Not sure if we cover you? Ask us
Get a written quote for fascias & soffits — free, no obligation.
Free inspection as soon as we can. Written quote usually the same day as the visit. Phone answered by a roofer — no call centre, no chasing.